![]() All done! If anyone’s interested, I’ll try to upload a copy of my pattern in size 4t. I tied a small bow with a little extra bias tape and hand stitched it to the front of the dress. Sew the ends of your elastic together and finish the hemline as desired: Use a safety pin to thread elastic through it and gather until the neckline is as small as you’d like (it helps to try it on at this point). Sew the bias tape to the outside of the neckline, turn and press to the inside, then stitch close to the edge of the tape to create a casing. I used single fold bias tape to create the casing (store bought this time). ![]() Nearly done! We just need to add a casing that goes all the way around the neckline/shoulders to hold some elastic. I just made some single fold bias tape from the extra fabric for this, although it all gets folded to the inside so you don’t see it – so it doesn’t need to match. Next I attached the sleeves to the bodice and finished the arm holes with single fold bias tape, as you see below. ![]() You can just hem it, or add trim like I did. Next, finish the bottom edge of the sleeve. ![]() Place bodice pieces RST together and sew down the sides. Then I cut two of the bodice (on the fold) and two sleeves (on the fold). That gives the dress and sleeves enough extra room to add gathers all around the neckline and shoulders for the “peasant dress” look. The sleeve piece will also get cut on the fold, with the fold being over the shoulder.Ģ – I retraced the bodice piece, adding an extra 2 inches at the fold.ģ – I retraced the sleeve piece, adding an extra 2 inches at the fold. The bodice piece will get cut on the fold, with the fold being down the center. I cut the pattern into two pieces – a bodice piece and a sleeve piece. The only thing I should have done differently is to not cut the arm opening quite so low (I moved the bottom of the armhole up almost 2 inches on the pattern, so if you’re drafting your own you may want to print the pattern for reference). Here’s how:ġ – I used a t-shirt that fits my daughter well and freezer paper to trace general shape I wanted from the dress, as you can see in the photo. If your little girl doesn’t wear 4T, you can draft your own pattern. The design of this dress also looks super cute as a top – click through to this post to see an example and get a free pattern in size 4T. It’s not pink, it doesn’t look like a princess dress, and my daughter actually likes it – success! I chose a soft light blue chambray for the dress and added tiny pom pom trim around the hem and sleeves. I made up a quick pattern using a t-shirt as reference and sewed up this dress in just a few hours. Hi all! I have a really fun easy sewing project to share today – it’s a simple sundress with flutter sleeves. If not, keep reading to learn how to create the pattern in any size. NOTE: If your daughter happens to wear size 4T, you can download a free pattern for this flutter sleeve sundress here. It’s hard to believe the little peanut in these photos is about to head to second grade (and that my oldest is a senior in high school!). I’m pulling this post out of the archives today for those of you who may not have been around when I first published it four years ago! The flutter sleeve sundress was one of the first sewing patterns I published on my blog, and it’s still one of my favorite things that I’ve sewn for my daughter. In today’s post: Learn how to sew an adorable flutter sleeve sundress for a little girl.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |